AIR Base-1 is the most compact dedicated AIR series active subwoofer. Intended for smaller rooms AIR Base-1 offers high performance where space is an issue. Use one AIR Base-1 with AIR 6 in smaller rooms or link several Base-1's in bigger rooms increasing acoustic output 6 dB for each additional unit.
Through the TC Link (proprietary AIR network) AIR Base-1 integrates with AIR series monitors and delivers unique features such as integrated bass management and presets. To be used with both stereo and multichannel AIR systems in any demanding production environment including:
- Post Production and Editing suites
- Music Recording and Mixing
- DVD authoring and Mastering
- 5.1 Production (Audio or Audio for pictures)
- OB Vans
Combining technology from Dynaudio and TC, AIR Base-1 offers ultimate precision and total integration with AIR Series. AIR Base subwoofers can be used only with AIR Series monitors.
Typical room size range for one AIR Base-1 is :
30-60 m3 / 1000-2000 ft.3
Typical room size range for two or three AIR Base-1's is:
50-100m3 / 1600-3500ft3
- 250-watt amplifier
- 192 kHz support via Dual Wire
- TC Link input only - for total
- AIR Series integration
- Bass Management LP filters with selectable frequency crossover points integrates with corresponding HP filters in AIR Series monitors
- Advanced Bass Management
- LFE gain programmable in 0.5dB steps
- Selectable LFE 120 Hz LP filter (brickwall)
- Phase adjustment
- Programmable reference levels
- Level alignment in 0,1dB steps
- Integrated Parametric EQ's and delay (only accessible with PC-IP)
- Central and Remote control of system and parameters
|
| 
AIR Base-2 a dedicated AIR series active subwoofer is suited for small to medium sized rooms together with AIR 6 or AIR 15. Several units can be linked where in bigger rooms increasing acoustic output 6 dB for each additional unit linked.
Through the TC Link (proprietary AIR network) AIR Base-2 integrates with AIR series monitors and delivers unique features such as integrated bass management and presets. To be used with both stereo and multichannel AIR systems in any demanding production environment including:
- Post Production and Editing suites
- Music Recording and Mixing
- DVD authoring and Mastering
- 5.1 Production (Audio or Audio for pictures)
- Broadcast
- Film editing
Combining technology from Dynaudio and TC, AIR Base-1 offers ultimate precision and total integration with AIR Series. AIR Base subwoofers can be used only with AIR Series monitors.
Typical room size range for one AIR Base-2 is:
50-100 m3 / 1600-4400 ft3
Typical room size range for two AIR Base 2's is:
75-125 m3 / 2600-4400 ft3
- 375-watt amplifier
- 192 kHz support via Dual Wire
- TC Link input only - for total AIR Series integration
- Bass Management LP filters with selectable frequency crossover points integrates with corresponding HP filters in AIR Series monitors
- Advanced Bass Management
- LFE gain programmable in 0.5dB steps
- Selectable LFE 120 Hz LP filter (brickwall)
- Phase adjustment
- Programmable reference levels
- Level alignment in 0,1dB steps
- ntegrated Parametric EQ's and delay (only accessible with PC-IP)
- Central and Remote control of system and parameters
|
| 
AIR Base 12 is a recent addition to the AIR series, and with a total frequency response of 22 Hz - 200 Hz and 500 watts of amplification, this subwoofer delivers a clear and crisp punch to the bottom.
The subwoofer sports a new class D amp developed at the TC Electronic laboratories, which will assure "top of the line" quality and an abundance of power and reliability. On top of that the AIR Base 12 comes with a new 12" woofer that was specifically designed for low frequency reproduction and extremely tight impulse response.
AIR Base 12 is a compact and dedicated AIR series active subwoofer. Intended for smaller and medium size rooms, AIR Base 12 offers the high performance that has become the trademark of Dynaudio Acoustics' AIR Series. Use one AIR Base 12 with e.g. AIR 6 or 15 in smaller rooms, or link several Base 12's in bigger rooms with e.g. AIR 20 or 25 and increase the acoustic output with each additional unit.
Through the TC Link (proprietary AIR network) AIR Base 12 integrates with AIR series monitors and delivers unique features such as advanced bass management and a wealth of other tweaking possibilities. This subwoofer will be an ideal complement for both stereo and multichannel setups like:
- Editing suites.
- Post Production facilities.
- Music recording and mixing studios.
- Larger OB vans.
- DVD authoring and mastering.
- Stereo and Multichannel production.
Combining technology from Dynaudio and TC, AIR Base 12 offers ultimate precision and total integration with AIR Series. AIR Base subwoofers can be used only with AIR Series monitors. - New class D amp with TC technology
- New 12" woofers specially designed for AIR Base 12 & 24
- 192 kHz support via Dual Wire
- Networking in-between all AIR components
- Central and remote control of system and parameters
- Acoustic placement compensation
- Preset storage and recall, and programmable reference levels
- Integrated parametric EQs and delay in each monitor (PC-IP only)
- Advanced Bass Management
- Level alignment in 0,1dB steps
- All monitors aligned within +/- 0.2dB precision
- Direct Digital inputs and Analog inputs (optional)
- 500-watt amp package
- Supporting multichannel setups
|
|
AIR Base 24 is yet another new member of the AIR Series and it comes with a total frequency response of 20 Hz - 200 Hz. With the massive 700 watts of amplification, the AIR Base 24 gives the phrase "Pump up the volume" an entirely new meaning.
The subwoofer sports a new class D amp developed at the TC Electronic laboratories, which will assure "top of the line" quality and an abundance of power and reliability. On top of that the AIR Base 24 comes with 2 new 12" woofer that was specifically designed for low frequency reproduction and extremely tight impulse response.
Suited for medium and large sized rooms, this subwoofer works splendidly with the larger monitors of the AIR Series, delivering one of the most powerful integrated solutions for stereo and multichannel monitoring found anywhere.
The AIR Base 24 takes benefit of all the AIR Series features like Advanced Bass Management and 192 kHz support via dual wire integrating perfectly into demanding production environments like:
- Editing suites.
- Post Production facilities.
- Music recording and mixing studios.
- DVD authoring and Mastering.
- Stereo and Multichannel production.
- Broadcast facilities.
Combining technology from Dynaudio and TC, AIR Base 24 offers ultimate precision and total integration with AIR Series. AIR Base subwoofers can be used only with AIR Series monitors.
- New class D amp with TC technology
- New 12" woofers specially designed for AIR Base 12 & 24
- 192 kHz support via Dual Wire
- Networking in-between all AIR components
- Central and remote control of system and parameters
- Acoustic placement compensation
- Preset storage and recall, and programmable reference levels
- Integrated parametric EQs and delay in each monitor (PC-IP only)
- Advanced Bass Management
- Level alignment in 0,1dB steps
- All monitors aligned within +/- 0.2dB precision
- Direct Digital inputs and Analog inputs (optional)
- 700-watt amp package
- Supporting multichannel setups
|
| 
The BM 9S subwoofer is intended to operate with the BM series monitors, more specifically, the BM 5A monitor. It is extremely well-suited for that extra punch to the bottom in setups where space is limited. The BM 9S delivers a clear, crispy and surprisingly powerful punch when you take its almost diminutive size into account. The BM 9S will complement stereo and multichannel monitoring equally well and when daisy-chaining of subwoofers is needed, it sports a low level LFE input/output.
For significant control and enhancement of the general performance, the BM 9S is a closed cabinet type. This creates an internal pressure by which the woofer gains a considerable amount of precision when it comes to the reproduction of low frequent signals. This precision is easily audible and it augments the feeling of reality that the listener experiences.
The BM 9S is very suitable for the following production environments:
- Post Production
- Music Recording and Mixing
- Film Editing (smaller rooms)
- DVD authoring and Mastering
- Multichannel Production (Audio or Audio for pictures)
- Broadcast
- Edit suites
- OB vans
The BM 9S is designed according to the strict BM series specifications. With a 10” woofer and 200 Watts of power, and virtually minute dimensions, this sub is tailor-made to take care of even the most comprehensive challenges where space is scarce. Being every bit as versatile as the rest of the BM series, BM 9S is a very competent partner for smaller stereo and multichannel setups, giving a very powerful system for even the most demanding users across the globe.
The Auto On/Off function, provides a minimized idle energy usage by shutting off after minutes of no input signal. The auto sensing circuit enables BM9S to automatically come to life when input signal is detected.
The satellite filters that this sub sports, provides high-pass filtering of the monitor source signal allowing 60Hz or 80Hz corner frequencies.
This is a huge advantage for the monitor performance, as the satellites do not need to deal with power consuming lower frequencies. This leaves all the satellite power to greatly accelerate performance and precision.
Main Features:
- 10” woofer
- Phase adjustment in 0° / 180°
- Auto on/off, power LED
- Mode selection, LFE or slave
- Adjustment of low-pass corner frequencies (50-150Hz)
- SAT/SUB high-pass adjustment, Flat, 60 Hz, 80 Hz
- Small dimensions: 11.6” X 11.4” X 12.5”
- 200 W @ 4 Ohms
- Discrete LFE input, slave output for linking
- Closed cabinet for extremely precise low frequency reproduction
|
|
The BM 14S subwoofer is perfectly aligned for operation with the BM and M series monitors.
For larger multichannel setups with e.g. five M1.5's, multiple BM 14S's will be a preferred choice.
The BM 14S is designed to take care of the most challenging requests and it will compliment larger stereo and multichannel setups in even the most demanding studios.
The BM 14S has been designed as a closed cabinet type subwoofer. This type of cabinet design gives you significant control and enhancement of the general performance as the closed cabinet creates an internal pressure. This adds considerably to the amount of accurately reproduced low frequency signals. When audio reproduction is more accurate, it will add to the sense of reality, and the BM 14S ensures exactly that.
The BM 14S is very suitable for the following production environments:
- Post Production
- Music Recording and Mixing
- Film Editing
- DVD authoring and Mastering
- Multichannel Production (Audio or Audio for pictures)
- Broadcast
- Edit suites
With a substantial 300 watts of power coming from the 12” woofer and an impressive low frequency limit of 18 Hz, this subwoofer is the perfect match for the BM and M series monitors.
With an auto On/Off function, energy usage shuts off after minutes of no input signal, thereby saving energy when the subwoofer is idle. As soon as an input is detected, the auto sensing circuit enables the subwoofer to come back to life.
A satellite filter feature is provided by the BM 14S, enabling adjustment of low-pass corner frequencies from 50 to 150Hz of the monitor source signal. The subwoofer will thus take care of the lower and power consuming frequencies, and thereby adding to the performance and clarity of the monitors in the system. This is due to the high-pass filtering feature that the BM 14S comes with. If the need arises to daisy-chain more subwoofers to the same system, the low level LFE output gives you exactly that choice.
Main Features:
- 12” woofer
- Phase adjustment in 0° / 180°
- Auto on/off, power LED
- Mode selection, LFE or slave
- Seamless adjustment of low-pass corner Frequencies
- SAT/SUB high-pass adjustment, Flat, 60 Hz, 80 Hz
- Dimensions: 13.8" x 14.5" x 16.5" / 350 x 368 x 420 mm
- 300 W @ 4 Ohms
- Discrete LFE input, slave output for linking
- Closed cabinet for extremely precise low frequency reproduction
|
|
