Tannoy

For those on a budget, the Reveal provides a high quality monitor with real high-end features. The distinctive cabinet has been designed to offer increased structural integrity and reduced HF diffraction effects. Its unique 1 ¼" thick contoured MDF baffle provides a solid foundation for drive unit mounting as well as increasing overall stiffness. This means a clean and articulate performance for whatever project you have in mind. Reveal's drive units include a 1" soft dome tweeter and 6 1/2" bass unit manufactured in-house by Tannoy, ensuring quality and consistency in use. Both units are also magnetically shielded, so the Reveal can be positioned close to video monitors if desired. High power handling capability coupled with above average sensitivity means that Reveal can produce high SPL's without distortion. There is no better value on the market today. PERFORMANCE Sensitivity 90 dB / 2.83 V @ 1m (half space) Nominal Impedance 6 ohm Frequency Response +/- 3 dB 65 Hz - 20 kHz Power Handling (RMS/Programme) 50W / 100 W Recommended Amplifier Power 30 to 100 Watts into 8 ohms DRIVE UNITS High Frequency 1" soft dome tweeter, shielded Low Frequency 6.5" bass driver, shielded Dispersion 120 degrees CROSSOVER Frequency 3 kHz CONSTRUCTION Enclosure Type Optimized bass-reflex loaded Volume 12 Litres Dimensions 13.38" x 8.27" x 10.24" Weight 15.4 lbs Finish Red satin baffle Grey suedette vinyl sides and back. Front Baffle Panel 1 1/4" MDF Magnetically Shielded Included

The System 1200 reference monitor is capable of accurate reproduction at very high sound pressure levels. It can be used as either a mid-field monitor or as a main monitor in smaller studios. The computer-optimized reflex cabinet uses a Tannoy 12" Dual Concentric(TM) drive unit, giving a frequency response down to 40 Hz. Because the Dual Concentrics high frequency dome is located at the acoustic center of the low frequency cone the unit behaves as a single point source, mirroring the way sound is produced in real life. In addition, the natural directivity control allows a ninety-degree dispersion pattern, minimizing reflections within the listening environment. The System 1200 cabinet uses a 1 1/2" thick MDF front baffle to provide a strong structural foundation for mounting the drive units and increase overall cabinet rigidity. Internal cabinet cross bracing further stiffens the structure, meaning a tight and fast low frequency response with low distortion. Applications for the System 1200 include audio visual, broadcast and post-production facilities as well as music studios and quality control applications. Like all System Series monitors magnetic shielding is available as an optional, allowing use in close proximity to video monitors. PERFORMANCE Sensitivity 95 dB / 1 W @ 1m (half space) Nominal Impedance 8 ohm Frequency Response 3 dB 40Hz - 20kHz Power Handling (RMS/Programme) 180 W / 350 W Recommended Amplifier Power 100 to 300 Watts into 8 ohms DRIVE UNITS Driver Type 12" Tannoy Dual ConcentricTM Dispersion 90 degrees conical CROSSOVER Frequency 1.3 kHz CONSTRUCTION Enclosure Type Optimized bass-reflex loaded Volume 74 Litres Dimensions 15.59" x 25.55" x 16.06" Weight 59.5 lbs Finish Charcoal soft texture baffle Grey suedette vinyl sides and back Magnetically Shielded Available upon request at additional cost.

Designed to be either freestanding or soffit-mounted, the System 215DMT II offers a powerful and articulate performance for studio main monitoring. Based around the 15" Dual Concentric(TM) drive unit, the system supplements low frequencies through the addition of a 15" bass unit that can be used to either operate below 250Hz or to run in parallel with the Dual Concentric(TM) driver. This allows optimization of the system for the best bass response and maximum SPL. Each drive unit is mounted into its own separate chamber within the cabinet and is computer-optimized with twin laminar-flow reflex port tubes. The 15" point-source Dual Concentric(TM) drive unit ensures consistent and stable imaging across a wide listening area, while its controlled directivity minimizes the effect of reflections from room boundaries. Crossover components are over-specified and include a vacuum impregnated air-core inductor, copper capacitors for flux modulation control, and a Mega HF capacitor. Internal wiring is custom-woven and the split crossover is biwireable if desired. Whether used as part of a modern multi-channel or traditional two-channel system, the System 215DMT II provides superior performance for the professional recording studio. PERFORMANCE Sensitivity 101 dB SPL / 2.83 V @1m (half space) Nominal Impedance 4/8 ohm Frequency Response 35Hz - 25kHz Power Handling (RMS/Programme) 250 W / 500 W Recommended Amplifier Power 150 to 500 Watts into 8 ohms DRIVE UNITS Driver Type 15" Tannoy dual ConcentricTM Supplementary Bass Unit 15" bass unit Dispersion 90 degrees conical CROSSOVER Frequency 250 Hz & 1.5 kHz CONSTRUCTION Enclosure Type Optimized bass-reflex loaded Volume 300 Litres Dimensions 30.94" x 35.672 x 21.85" Weight 187.0 lbs Finish Velti shadow grey soft texture finish, metallic speckled finish on top, bottom and sides Magnetically Shielded Available upon request at additional cost.