QUESTED F11

Technical information Description A compact self-powered active speaker with full magnetic shielding. Ideal for a wide variety of applications including installations, workstation monitor, nearfield, surround sounds, and many more. Size (WxHxD) 225mm x 316mm x 295mm (9" x 12.5" x 11.5")

Weight 12.5 kgs (27.5 lbs) Drivers Bass cone 165 mm(6.5 in) High Frequency softdome 28mm (1.12 in) Maximum SPL >100db continues music material at 1m Frequency Response 65Hz - 20KHz +/- 3dB Input Connector XLR 3 Type Female and 1/4" RTS jack. Either can be used as link. Impedance 10 ohm. Electronically balanced RFI filtered Wiring Pin 1 ground or Sleeve, Pin 2 hot or Tip, Pin 3 cold or Ring Gain control +/-10dB Continuous control Filters Subsonic -3dB at 50Hz, 12dB/oct. Ultrasonic -3dB at 110kHz, 6dB/oct. HF Contour 2 three-position switches, offering 3 lift and 3 cut settings (see frequency plot for effect of settings). LF Contour 2 three-position switches, offering 3 lift and 3 cut settings (see frequency plot for effect of settings). Crossover 1.5kHz Power Amplifer LF output power 110W rms HF output power 40W rms T.H.D. <0.03% at levels up to 1dB below clip, 20Hz - 20kHz typ. 0.005% at 20W rms 1kHz. Hum + Noise >-100dB referred to clip Indication Power on Front mounted LED (green) indicates power applied Thermal protection Fully protected Power requirements Voltage Set by internal plug: normal 115V or 230V at 50 - 60Hz AC. F11A Frequency response and contour selection F11A Frequency response on axis & 30 degrees off axis